How To Unbrick Your Dead Infinix Zero | X506

Here is how to unbrick your Infinix Zero X506,
first we gonna be talking about different types of
brick.
We have three type of bricking
Soft Brick:

In this case, your phone stuck at boot animation
or reboot from the boot animation.

Hard Brick:
Here your phone stuck on boot.img or factory
image i.e Infinix without showing the loading dot
sign below your screen.
Dead Brick/Black Screen
Honestly I won't pray you experience this
because in this case your phone won't turn on /
Power On or Charge nor show the red led
charging sign....this is the worst state a phone
could be #TBH #TOOBADSTATE
How to Unbrick Dead Bricked Infinix Zero
1) First we would need to get our PC set before
we could execute this. Important stuff we need
is to install drivers for the particular phone HERE
and how to install. Its a very deatailed tutorial and it should help alot.
After Successful installation proceed to next
step.
2) Download my scatter file I made with my Mtk
Droid Tool here , create new folder on your
desktop name it "Infinix Flash" without quote.
(Contains 10 files) and extract this file there.
3) Download Sp Flash Tool here Create a new
Folder on your desktop name it "Sp Flashtool"
without quote, Extract the zip file of Sp Flashtool
navigate to the folder you created earlier "Sp
Flashtool" on your desktop and extract it there.
Run Sp Flashtool as Administrator, it will pop "no
scatter file selected" click ok. Click on the Second
bar where you see Scatter-Loading browse
where you extracted
FlashToolbackupinfinixzero16+2.zip open the
folder named " Infinix Flash" and select the
scatter file.
Turn Off your phone and wait for like 30secs and
Hit the Download then plug your Infinix back to
the Pc. When you see the red link you're good
but if no happens check your drivers. After the
Yellow Link shows, and OK sign, unplug your
device.
NOTE: You will be able to power your phone and
go to cwm recovery for restoration of CWM
backup or Installation of new Rom....